E-Z Mount Bracket System

We are currently experiencing difficulty with our E-Z Mount video installation guide and apologize for the inconvenience. Until this problem is corrected, please see our E-Z Mount photo installation guide below. Thank you for your patience.

Mount the E-Z Mount Wall Mount Support Bracket (WSB) at the desired location using the four (4)1/4" x 1 1/2" bolts supplied. If mounting on brick, stone or stucco, masonry anchors or other mounting hardware may be needed. Legendary Lighting does not supply masonry anchors.

Position the light bracket on top of the WSB. Secure in place using one bolt through the far left or far right hole in the top of the lantern bracket and through the curved slot at the top of the WSB. Secure the bolt with nylock nut; make sure to leave the bolt and nut loose enough to be able to rotate or swivel the lantern bracket.

After connecting to gas and/or electricity, rotate the lantern bracket into final position and install one bolt at top center and one bolt at bottom right. If a top curl is used, assemble it while installing the top center bolt.

For assistance, please call 1-800-350-5361